Matrix – HDM808X-PRO
8X8 Modular Matrix with Extension by Single CAT6/7
Multi-Capable 8X8 Matrix Machine that Supports Different Input/ Output Module and Extender
[huge_it_catalog_single_product id=”123″]
Features :
- Routing any 1 of 8 sources to either of 8 displays that are being extended up to 150m (492ft) away work with KD’s HDbitT HDX Series RX
- Pre-installed with 8 HDMI input modules but DVI/SDI/VGA input modules are available upon special order
- Fully controllable via front panel push buttons, IR remote controller, RS232 or even IP control interface
- Connections showed through front panel LCD display
- Adopted the innovative HDbitT technology, more flexible solutions and capability
- IR pass-back to control local source
- Standard 3U rack mount Chasis Case design
- An Ideally cost-effective solution for Pro AV integration
SPECIFICATION
| Input Connectors: | 8 x HDMI (Type-A 19 pin Female) |
| 8 x 3.5mm Mini-mono Female (IR) | |
| Output Connector: | 8 x RJ45 Female |
| Power Connector: | AC 3Pin Power Male Inlet(C14) Fused |
| HDMI Version: | 1.3 |
| HDMI Compliance: | YES |
| Data Rate: | 10.2Gbps(max.) |
| Video Support: | 720p @60Hz |
| 1080p Full HD @60Hz | |
| Audio Support: | L/R Stereo Audio |
| Transmission Protocol: | HDbitT |
| Transmission Range: | CAT6 – 120m(393ft) maximum ** |
| CAT7 – 150m(492ft) maximum ** | |
| IR Frequency Support: | 20~60Khz |
| Input DDC Signal: | 5 volts (peak to peak, TTL) |
| Input TMDS Signal: | 0.5~1.5 volts (peak to peak) |
| Power Switch: | On/Off Rocker Switch |
| Switching Selector: | 19 x Tact-type Push Button |
| IR Remote Controller | |
| 1 x RS232 (DE-9 aka DB-9 Female) | |
| *Software Included | |
| Power Supply: | AC 110~240v |
| Power Consumption: | 60w (max.) |
| Operating Temperature: | 0~50°C |
| Housing: | Alluminium Alloy |
| Gross Dimension: | 483 x 240.5 x 133 mm(appx.) |
| Gross Weight: | 6KG (appx.) |