Matrix – HDM404X-PRO
4X4 Modular Matrix with Extension by Single CAT6/7 [HDbitT]
Multi-Capable 4X4 Matrix Machine that Supports Different Input/ Output Module and Extender
[huge_it_catalog_single_product id=”122″]
Features :
- Routing any 1 of 4 sources to either of 4 displays that are being extended up to 150m (492ft) away work with KD’s HDbitT HDX Series RX
- Pre-installed with 4 HDMI input modules but DVI/SDI/VGA input modules are available upon special order
- Fully controllable via front panel push buttons, IR remote controller, RS232 or even IP control interface
- Connections showed through front panel LCD display
- Adopted the innovative HDbitT technology, more flexible solutions and capability
- IR pass-back to control local source
- Standard 3U rack mount Chasis Case design
- An Ideally cost-effective solution for Pro AV integration
SPECIFICATION
Input Connectors: | 4 x HDMI (Type-A 19 pin Female) |
4 x 3.5mm Mini-mono Female (IR) | |
Output Connector: | 4 x RJ45 Female |
Power Connector: | AC 3Pin Power Male Inlet (C14) Fused |
HDMI Version: | 1.3 |
HDMI Compliance: | YES |
Data Rate: | 10.2Gbps(max.) |
Video Support: | 720p @60Hz |
1080p Full HD @60Hz | |
Audio Support: | L/R Stereo Audio |
Transmission Protocol | HDbitT |
Transmission Range | CAT6 – 120m(393ft) maximum ** |
CAT7 – 150m(492ft) maximum ** | |
IR Frequency Support | 20~60KHz |
Input DDC Signal: | 5 volts (peak to peak, TTL) |
Input TMDS Signal: | 0.5~1.5 volts (peak to peak) |
Power Switch: | On/Off Rocker Switch |
Switching Selector: | 11 x Tact-type Push Button |
IR Remote Controller | |
1 x RS232 (DE-9 aka DB-9 Female) | |
*Software Included | |
Power Supply: | AC 110~240v |
Power Consumption: | 35w (max.) |
Operating Temperature: | 0~40°C |
Housing: | Aluminium Alloy |
Gross Dimension: | 270 x 200 x 133mm(appx.) |
Gross Weight: | 3.6KG (appx.) |