Extender – HDXFi2000IR
HDMI Extender over Fiber Optic [HDbitT]
The advanced and sophisticated Fiber Optic transmission technology is now affordable
[huge_it_catalog_single_product id=”93″]
Features :
- Extends HDMI content at Full HD 1080p up to 20km over a single mode Fiber Optic cable
- Full compliant with v1.4 and HDCP
- Adopted the innovative HDbitT technology, more flexible solutions and capability
- By using Optical Switch, easily achieve unlimited long range extension with cascade connection and able to build point to point, point to multi-points
- IR pass-back to control local source
- Wall mount design for installation convenience
- Thanks to the Fiber Optic technology, no more electromagnetic interference even in long distance transmission
SPECIFICATION
| Input Connectors: | 1 x HDMI (Type-A 19 pin Female) [TX] |
| 1 x Optical Fiber Female (Type-SC) [RX] | |
| 1 x 3.5mm Mini-mono Female [RX] | |
| Output Connector: | 1 x HDMI (type-A 19 pin Female) [RX] |
| 1 x Optical Fiber Female (Type-SC) [TX] | |
| 1 x 3.5mm Mini-mono Female (IR) [TX] | |
| Power Connector: | 2.1mm DC Female |
| HDMI Version: | 1.4 |
| HDCP Compliance: | YES |
| Video Support: | Up to 1080p Full HD @60Hz |
| Audio Support: | Surround Sound (up to 7.1ch) |
| Stereo Digital Audio | |
| Transmission Protocol: | HDbitT |
| Fiber Optic Cable: | Single Mode |
| Transmission Range: | 20km (65600ft) maximum ** |
| Central Wave Length: | 1310nm |
| Link Loss: | <= 14dB |
| Output Light Power: | >= -11dBm |
| Receive Sensitivity: | <= -32dBm |
| Return Loss: | 15dB |
| IR Frequency Support: | 20~60KHz |
| Input DDC Signal: | 5 volts (peak to peak, TTL) |
| Input TMDS Signal: | 0.5~1.5 volt (peak to peak) |
| Power Supply: | DC 5v 2a |
| Power Consumption: | 4w (max) [TX] |
| 3.5w (max.) [RX] | |
| Operating Temperature: | 0~55°C |
| Housing: | Aluminium Alloy |
| Gross Dimension: | Each 138 x 81.5 x 24 mm(appx.) |
| Gross Weight: | Each 178 g (appx.) |
| **Tested in optimal condition, outcome may vary due to many factors. | |