Extender – HDXW120IR

HDMI Wall Plate Extender over CAT6/7 with IR Pass-back

Breakthrough HDMI Cable Limitations and Extends HDMI Content over Single CAT6/7

HDXW120IR

Contact Seller
X

Contact Seller


Features : 

  • Extends HDMI content at Full HD 1080p up to 120m over single CAT6 or higher grades of UTP/STP cable
  • Full compliant with v1.3 and HDCP
  • By using Network Switch, easily achieve unlimited long range extension with cascade connection and able to build point to point, point to multi-point
  • Support KD’s SUPALINK (consult local dealer)
  • Fully functioning HDMI extender underneath stylish wall plate            (86 type AKA 3″ x 3″)
  • Fully functioning HDMI extender underneath stylish wall plate           (86 type AKA 3″ x 3″)
  • IR pass-back to control local source
  • 110~240v AC power direct input, no external DC power adaptor needed

 
SPECIFICATION

Input Connectors: 1 x HDMI (Type-A 19 pin Female) [TX]
  1 x RJ45 Female [RX]
  1 x 3.5mm Mini-mono Female(IR) [RX]
Output Connector: 1 x HDMI (type-A 19 pin Female) [RX]
  1 x HDMI (type-A 19 pin Female) [TX, Loop]
  1 x RJ45 Female [TX]
  1 x 3.5mm Mini-mono Female(IR) [TX]
HDMI Version: 1.3
HDCP Compliance: YES
Data Rate: 8.91 Gbps (max.)
Video Support: 720p @60Hz
  1080p Full HD @60Hz
Audio Support: Surround Sound (up to 7.1ch)
  Stereo Digital Audio
Transmission Protocol HDbitT
Transmission Range CAT5e – 100m (328ft) maximum **
  CAT6 – 120m (393ft) maximum **
  CAT7 – 150m (492ft) maximum **
IR Frequency Support: 20~60KHz
Input DDC Signal: 5 volt (peak to peak, TTL)
Input TMDS Signal: 0.5~1.5 volt (peak to peak)
Power Supply: AC 110~240v
Power Consumption: 3.5w (max.) [TX]
  3w (max.) [RX]
Operating Temperature: 0~55°C
Housing PC + ABS Fireproof Material
Gross Dimension Each 86 x 86 x 37 mm(appx.)
Gross Weight Each 110 g (appx.)
**Measured base on 100% pure copper global standard UTP cable and tested in optimal condition.