Extender – HDXC700

HDMI to RF Extender over Coaxial Cable RG6/7/11

Upgrade your old system to Full HD by using existing coaxial cabling
[huge_it_catalog_single_product id=”92″]
Features : 

  • Converts HDMI signal to HD digital TV signal base on DVB-T CATV mode
  • Extends HDMI content at Full HD 1080p up to 700m over RG6 or higher grades of coaxial cable
  • Full compliant with v1.3 and HDCP
  • Lossless transmission, video quality as good as using HDMI cable
  • Support CATV splitter and amplifier thus making it easy to build point to multi-points, multi to multi-points matrix connection
  • Support up to 99 channels input


Input Connectors: 1 x HDMI (Type-A 19 pin Female) [TX]
1 x RJ45 Female (75Ω Type-F) [RX]
Output Connector: 1 x HDMI (type-A 19 pin Female) [RX]
1 x RF Female (75Ω Type-F) [TX]
HDMI Version: 1.3
HDCP Compliance: YES
Video Support: 720p @60Hz
1080p Full HD @60Hz
Video Encoding Format: H.264
Audio Encoding Format: MPEG2
Coaxial Cable Support: RG6/7/11
Transmission Range: 700m (2290ft) maximum **
Transmission Delay: Within 500 ms
Effective Bit Rate: 31.6M Bits (max.)
Insertion Loss: Below 2dBm
RF TX Output Consumption: +0dBm
RF RX Sensitivity: Different for every frequency point
Power Supply: DC 5v 1a
Power Consumption: 3.5w (max.) [TX]
3w (max.) [RX]
Operating Temperature: 0~50°C
Housing: Metal
Gross Dimension: Each 180 x 30 x 22 mm(appx.)
Gross Weight: Each 169 g (appx.)
**Measured base on 100% pure copper global standard UTP cable and tested in optimal condition.