Extender – HDX60IRPRO
HDMI Extender with Local Loop-out and IR Pass-back
Breakthrough HDMI Cable Limitations and Extends HDMI Content over Single CAT6/7
[huge_it_catalog_single_product id=”53″]
Features :
- Extends HDMI content at Full HD 1080p up to 60m over single CAT6 or higher grades of UTP/STP cable
- Full compliant with v1.3 and HDCP
- Auto signal optimisation to match cable length to ensure best picture quality
- Lossless transmission, video quality as good as using HDMI cable
- Plug-n-Play, no software or driver needed
- Wall-mount design for installation convenience
- IR pass-back to control local source
- HDMI loop-out for local display, reduce the use of splitter in the system
SPECIFICATION
| Input Connectors: | 1 x HDMI (Type-A 19 pin Female) [TX] |
| 1 x RJ45 Female [RX] | |
| 1 x 3.5mm Mini-mono Female(IR) [RX] | |
| Output Connector: | 1 x HDMI (type-A 19 pin Female) [RX] |
| 1 x HDMI (Type-A 19 pin Female) [TX,Loop] | |
| 1 x RJ45 Female [TX] | |
| 1 x 3.5mm Mini-mono Female(IR) [TX] | |
| Power Connector: | 2.1mm DC Female |
| HDMI Version: | 1.3 |
| HDCP Compliance: | YES |
| Data Rate: | 6.24 Gbps (max.) |
| Video Support: | 720p @60Hz |
| 1080p Full HD @60Hz | |
| Audio Support: | Surround Sound (up to 7.1ch) |
| Stereo Digital Audio | |
| Transmission Range | CAT5e – 50m (164ft) maximum ** |
| CAT6 – 60m (196ft) maximum ** | |
| IR Frequency Support: | 20~60KHz |
| Input DDC Signal: | 5 volt (peak to peak, TTL) |
| Input TMDS Signal: | 0.5~1.5 volt (peak to peak) |
| Power Supply: | DC 5v 1a (optional) |
| Power Consumption: | 3w (max.) [TX] |
| 2w (max.) [RX] | |
| Operating Temperature: | 0~55°C |
| Housing | Aluminium Alloy |
| Gross Dimension | Each 71.6 x 66.6 x 24.8 mm(appx.) |
| Gross Weight | Each 83 g (appx.) |
| **Measured base on 100% pure copper global standard UTP cable and tested in optimal condition. | |