Extender – HDXC700
HDMI to RF Extender over Coaxial Cable RG6/7/11
Upgrade your old system to Full HD by using existing coaxial cabling
[huge_it_catalog_single_product id=”92″]
Features :
- Converts HDMI signal to HD digital TV signal base on DVB-T CATV mode
- Extends HDMI content at Full HD 1080p up to 700m over RG6 or higher grades of coaxial cable
- Full compliant with v1.3 and HDCP
- Lossless transmission, video quality as good as using HDMI cable
- Support CATV splitter and amplifier thus making it easy to build point to multi-points, multi to multi-points matrix connection
- Support up to 99 channels input
SPECIFICATION
| Input Connectors: | 1 x HDMI (Type-A 19 pin Female) [TX] |
| 1 x RJ45 Female (75Ω Type-F) [RX] | |
| Output Connector: | 1 x HDMI (type-A 19 pin Female) [RX] |
| 1 x RF Female (75Ω Type-F) [TX] | |
| HDMI Version: | 1.3 |
| HDCP Compliance: | YES |
| Video Support: | 720p @60Hz |
| 1080p Full HD @60Hz | |
| Video Encoding Format: | H.264 |
| Audio Encoding Format: | MPEG2 |
| Coaxial Cable Support: | RG6/7/11 |
| Transmission Range: | 700m (2290ft) maximum ** |
| Transmission Delay: | Within 500 ms |
| Effective Bit Rate: | 31.6M Bits (max.) |
| Insertion Loss: | Below 2dBm |
| RF TX Output Consumption: | +0dBm |
| RF RX Sensitivity: | Different for every frequency point |
| Power Supply: | DC 5v 1a |
| Power Consumption: | 3.5w (max.) [TX] |
| 3w (max.) [RX] | |
| Operating Temperature: | 0~50°C |
| Housing: | Metal |
| Gross Dimension: | Each 180 x 30 x 22 mm(appx.) |
| Gross Weight: | Each 169 g (appx.) |
| **Measured base on 100% pure copper global standard UTP cable and tested in optimal condition. | |